Collar manifold, Aprilia RS125
€27.03
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA system:
EXCS-0019
TYGA no: EXMN-0004Â
SKU: apr-10003 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopSeat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon fuel tank, Honda NSR250 MC28
€1,444.49
Fuel Tank, Carbon, NSR250, MC28
Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0003
BPFS-0004
BPFS-0032
BPFS-0059
BPFS-0060
BPFS-0129
BPFS-0130
BPFS-0131
TYGA no: BPCG-0001
SKU: hon-10682 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon Console, (GRP) KTM RC125/200/250/390
€200.66
Console, (Carbon) KTM RC125/200/250/390
Replacement part to be used on TYGA upper cowling BPCU-7231(p)
TYGA no: BPCX-7531
SKU: ktm-10106 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390O- ring for TYGA silencer 2 stroke
€4.33
O- ring for TYGA silencer 2 stroke
TYGA no: EXOR-000
SKU: alg-10116 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Yamaha, YZ250 2005-15Tail tidy – Fender eliminator standard pipe , KTM RC390
€67.83
Fender Eliminator, KTM RC390, Standard Fender Replacement
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Note: this product is designed for motorcycles NOT using an underseat exhaust system.
See similar product TYLY-0147 which is designed specifically for use with the TYGA under seat exhaust system
TYGA no: TYLY-0148
SKU: ktm-10067 Categories: ALL products, Exhausts, KTM, RC 390, Shop, Universal parts, Various partsSplitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Front Fender, Carbon, Stock Shape, VJ21
€190.60
Front Fender, Carbon, Stock Shape, VJ21
Real carbon fibre reproduction of the stock Suzuki RGV250 VJ21 front fender.
Finished in high gloss, adds beauty and reduces unsprung weight. (Weight of part approx. 0.26 kg)
TYGA no: BPCF-0019
SKU: suz-10127 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250