Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer
€519.40
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted Moto Maggot silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Moto Maggot silencer EXSL-9213
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0095
SKU: kaw-10067 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Exhaust stay left (tyga), Honda NSR250 MC21 – MC28
€59.59
Due to requests from customers with MC21 and MC28s wanting more support of the Tyga exhaust system when used withGP Race Tail kits, we now have this product designed to be retro fitted with our GP Race Tail kits:
BPFS-0003, BPFS-0004, BPFS-0005, BPFS-0006, BPFS-45, BPFS-0046, BPFS-0059 and BPFS-0060
The stay is provide with bushes, nuts and bolts to mount to the subframe. Note, you will need to drill the subframe TYY-0007 to install this stay and some adjustment of the seat cowling may be required.
Please note this product is ‘handed’ and you need one of each TYLY-0100L (Left) and TYLY-0100R (Right) for one bike.
TYGA no: TYLY-1100L
SKU: hon-10374 Categories: ALL products, Bodykit replacement parts, Bodywork, Exhausts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, ShopVelocity Stacks, NC30, Kit, 4 pcs
€149.37
Fuel Tank, GRP, VFR400R NC30, Unpainted
Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Pillion seat cover “Black”, KTM RC390 2022 –
€122.50
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731black
SKU: ktm-10210 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFairing set street RSW, Honda NSR250 MC21
€664.06
Fairing set street RSW, Honda NSR250 MC21
This kit comprises all the parts shown on picture, which are also available separately.
* A clear screen is provided unless you specify tinted
This kit is supplied with all additional fasteners required to mount it to a stock Honda NSR250
TYGA no: BPFS-0001Â
SKU: hon-10223a Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopUpper cowling street RVF, NC35
€284.65
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings. Race version (BPFU-0009) also available.
Suitable with BPFL-0003 stock shaped lowers.
See also kits BPFS-0069 and BPFS-0070.
TYGA no: BPFU-0029
SKU: hon-10147 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopExhaustset stainless steel carbon silencer round, Honda CBR150
€520.76
This full race system has been specifically designed for the CBR150 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves 4.8 kg in weight (TYGA system 1.4 kg, stock system 6.2 kg!) and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0008Â
SKU: hon-10286 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopSilencer right shorty, stainless 70mm
€89.99
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0106R
SKU: yam-10087 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, Yamaha