Tank filler cap racing , Suzuki 3 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 3 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearign gloves
Supplied complete with seals and and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 3 bolt mounting arrangement. See also the 4 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only).
Suitable for the following models:
- SV650/SV650S (2003 – 2010)
- SV1000/SV1000S (2003 – 2010)
- GSXR 600 750 (2004 – 2010)
- GSXR 1000 (2003 – 2010)
- GSX1300R HAYABUSA (2008 )
- SFV 650 (2009 )
- GSX650F (2009 )
- GSF 650 1250 S (Bandit) (All Year)
- GSX650F 2008-2010
TYGA no: TYLY-0113
SKU: alg-10193 Categories: ALL products, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Shop, Suzuki, Tank fillersTank filler cap "racing", Kawasaki type 4
€69.87
Tank Filler Cap, Keyless, Racing Type, Kawasaki Type 4
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
Ninja 400 (2018-Current)
See also TYLY-0114, TYLY-0115 and TYLY-0115 for other Kawasaki types.
TYGA no: TYLY-0226
SKU: alg-10317 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-, Shop, Tank fillers, Various partsSilencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom
€313.65
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom, no fittings
See also EXSL-0058 silencer, long type.
Seat Pad (reproduction), HRC RS125 NX4
€22.73
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPSP-0009
SKU: hon-11421 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR500V NX6, RS250R NF5 / NX5, RS250R NXA, Various partsCarbon front fender, Yamaha YZF-R125 2009-
€228.22
Front Fender (Carbon), Yamaha YZF-R125 2009-2013. Supplied with all mounting hardware made from high quality stainless steel as shown in the photo below
Carbon fuel tank MK1, Aprilia RS250
€1,225.57
Carbon fuel tank MK1, Aprilia RS250
Top quality reproduction of the Aprilia RS250 MK1 fuel tank.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
For the construction of this tank, all the innovation and technology were used, it’s made with a particular technique that allows us to use a single piece of carbon with significant aesthetic and structural advantages The internally there are several layers of Kevlar to increase impact resistance.
The internal surface is treated with a special coating made to our specifications to ensure the seal over time. The air vent is in anodized and made and design in house.
And as a finishing touch, the carbon frame bracket is also supplied with titanium fixing screws.
Not included:
– fuel cock
– stock mounting rubbers
– filler cap and seal
TYGA no: 004900TYGA
SKU: apr-10102 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopFront sprocket 15T, Honda MSX125 GROM
€7.37
15T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-C7-420-F-15T
SKU: MSX-10086 Categories: ALL products, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsCartridge, Long Strand Glass Wool, Four Stroke, 2
€29.01
Cartridge, Long Strand Glass Wool, Four Stroke, 2 1
This is a replacement glasswool cartridge ideal for repacking Tyga or other similar sized silencers. Easy to install, clean and long lasting. Overall length 450 mm. X 98 mm. diameter
TYGA no: EXGL-0004
SKU: alg-10281 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Silencers