Clutch Cable, MC21
€47.38
Clutch Cable, MC21
This clutch cable is an alternative for the Honda OE part 22870-KV3-680.
TYGA no: TYPP-0021
SKU: hon-10828 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsWater Hose, NSR250 MC21/28
€16.87
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 19508-KV3-830
SKU: hon-11243 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCartridge glas wool, TYGA 2 stroke silencer
€10.81
This is a replacement glasswool cartridge ideal for repacking Tyga or other similar sized two stroke silencers.
Easy to install, clean and long lasting. Overall length 290 mm. X 58 mm. diameter
TYGA no: EXGL-0001
SKU: alg-10245 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopAthena cylinder set with piston, set 1 Aprilia RS250 – Suzuki RGV250
€735.12 €661.61
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10444 Categories: ALL products, Aprilia, High performance, High performance, High performance, RG125, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsUpper Cowling Race, (GRP) NX5 RS250R (late model style)
€328.76
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9236
SKU: hon-10944 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopVHM Cyl. Headset Honda CR250 ’02-’04
€347.95 €303.33
VHM Cyl. Headset Honda CR250 ’02-’04 (alg-10212) AA33042VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (20.60cc)Optional inserts:– blind– 19.80– 20.20– 20.60– 21.00This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33042Â Â Â Â Â Â Â Â
SKU: alg-10212 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsTYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsKitaco I-Map “plug and play”, Honda MSX125 GROM
€158.99
KITACO i-Map Fuel Injection Controller
“plug and play” type for wire splice type check product msx-10309
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
I-Map Fuel injection controller Kitaco voor Honda MSX / Grom 125.
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tunnable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432110
SKU: msx-10469 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop