Steering stopper, NSR250 MC21/MC28
€20.02
Steering stopper for race use. Reduces degree of movement in steering. Easy to attatch using hole for brake hose clamp on triple clamp.
TYGA no: TPER-0012
SKU: hon-10368 Categories: ALL products, Bodywork, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsSeal, RC Valve Shaft, MC28
€4.96
Seal, RC Valve Shaft, MC28
TYGA no: 91201-PA9-004
SKU: hon-11116 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon rear hugger, Honda VTR1000 Sp2
€191.84
This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application
Beautiful, perfect fitment and give your bike that HRC look.
Mirror (set), NC30 NC35
€24.56
Stylish simple lightweight mirrors to mount on bodywork. Ideal for panels which don’t have any mounting points for the mirrors such as race fairings with race stays such as TYGA Performance upper cowlings:
NOT recommended for fairings where the stock mirror position and stay is retained.
TYGA no: TYMR-0001
SKU: hon-10080 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, Honda, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, VFR400RR NC30Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2VHM Cyl. Headset Kawasaki KX125 ’03 –
€281.95 €256.04
VHM Cyl. Headset Kawasaki KX125 ’03 -> (alg-10218) AA33043VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33043
SKU: alg-10218 Categories: ALL products, Kawasaki, Kawasaki MX, Motocross, Shop, VHM productsSection header for TYGA exhaust, KTM RC390
€195.20
Section, Header,Stainless, KTM RC390
Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.
Compatible with the following exhausts:
Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.
Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062
Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092
TYGA no: EXPT-0003
SKU: ktm-10087 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSection, Final, Slash Cut Slip-On type, Stainless, R25/R3
€60.40
Section, Final, Slash Cut Slip-On type, Stainless, R25/R3
Used with exhaust system EXPS-0071