Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
€179.12
Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-9312R
SKU: hon-10718 Categories: ALL products, Bodykit replacement parts, Bodykit replacement partsCarbon set, Honda CBR125/CBR150 2011 –
€453.72
This set comprises the carbon products shown in the picture. Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
TYGA no: BPFS-0105
SKU: hon-10164 Categories: ALL products, Carbon, CBR125R/CBR150R 2011-, Honda, ShopUpper stay, standard Honda VFR400 NC30
€85.76
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: TYLY-0290
SKU: hon-11310 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsStep adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopLower cowling (GRP) white, Honda MSX125SF GROM
€332.31
Lower Cowling, (GRP) White MSX125SF, Grom 2nd gen 16-17
Lower Cowling, (GRP), White, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428W
SKU: msx-10383 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopBelly pan race cup style, KTM RC390 (16-)
€160.51
Belly Pan, Race, (GRP), Cup Style, KTM RC390 (16-18)
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 250 and 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
TYGA no: BPFL-7331
SKU: ktm-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopSet, Water Hose (6 pcs) NSR250 MC21/28
€70.73
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: NHPS-0009
SKU: hon-11241 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts