Carbon tank shields, Yamaha R6 2008-12
€263.23
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R6. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
TYGA no: BPCC-7109
SKU: yam-10022 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2008- 122T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsClutch Damper Rubber, MC28SP
€9.82
Clutch Damper Rubber, MC28SP
TYGA no: 22203-KV3-780
SKU: hon-11154 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Top triple clamp CNC black STREET, KTM RC390, 2022-
€486.77
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1531
SKU: ktm-10217 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSide fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Racing stepkit adjustable (race), KTM RC125/200/390
€423.04
STAA-0124 Race Only.
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Street/Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch, but this may be removed for racing purposes.
No provision for the side stand is provided. For side stand use, please see STAA-0024
Fitting the TYGA Step Kit for the KTM RC390 requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
* Peg position can be adjusted to four positions by 2x M8 bolts attaching the hanger plate to the main plate. After a position change, adjustment of the gear change arm and link rod length will be necessary. For your safety. please ensure all fasteners are tight before use, and we recommend the use of thread locking agent (such as Loctite 242) on the 2x M8 bolts.
&nbsp;<span class= s1 >Update your bike with this great TYGA performance, KTM power part!!</span>
<a href= {{media url= wysiwyg/06-ktm-rc-series-sk-online-9885a093.pdf }} target= _self >Click here for fitting instructions</a>
<style type= text/css ><!–
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px ‘Helvetica Neue’; -webkit-text-stroke: #000000}
span.s1 {font-kerning: none}
–></style>
TYGA no: STAA-0124
SKU: ktm-10037 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, ShopCarbon exhaust guard right, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021R
SKU: ktm-10062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopCarbon Seat set RVF, NC35
€912.34
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
TYGA no: BPCT-9004
SKU: hon-10139 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop