Carbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon exhaust guard, Honda NR750
€130.42
Exhaust Guard, Carbon, Honda NR750
This lightweight carbon exhaust guard replaces the heavy and ugly steel stock one and is molded the same shape for easy installation. This product is made using specially formulated high temperature resin and has a backing layer of carbon/Kevlar. Note this should be installed with mat, heat guard 50608-MT7-000 (NOT INCLUDED) or similar to prevent excessive heat reaching the guard.
Please note the photos of the heat mat 50608-MT7-000 are for reference and is not included with this product.
Lock washer clutch, RGV250/RS250
€3.49
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
RC Valve Cable A, MC28
€16.04
RC Valve Cable A, MC28
TYGA no: 14331-KV3-830
SKU: hon-11174 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Upper fairing set street RC211V, CBR250RR MC22
€451.91
This set of bodywork comprises of the parts shown below which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock MC22. It fits to the original meter and mirror stays and uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Carbon kill switch cover, Honda
€25.10
This cover fits on the kill switch to prevent accidental switching off of the engine in race situations. As used in Moto2 by Team SAG.
Attach with small amount of epoxy or silicone adhesive.
Will fit on many Honda’s and other brands motorcycles.
TYGA no: BPCC-0037
SKU: hon-10616 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2Carbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopTank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various parts