Front fender RC211V, NC35
€71.75
Attaches to the original NC35 RVF400 mounting points and can be used with all Tyga and Honda bodywork
Compatible Parts:
All Tyga Performance and Honda OEM panel
TYGA no: BPFF-9005
SKU: hon-10124 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopScreen, RC36-2, RC30 Style
€52.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: SCRE-0182
SKU: hon-11517 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistHandle bar bung (pair), Honda RVF400 NC35
€12.47
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
Under cowling (GRP) primer, Honda MSX125 GROM
€134.09
Under Cowl, (GRP), MSX125, primed ready for paint. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPFL-7028
SKU: MSX-10328 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCowling, Side, RH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0272-777
SKU: kaw-10197 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopBolt Flange, M6X20, MC21/28
€2.37
Bolt Flange, M6X20, MC21/28
TYGA no: 95701-06020-07
SKU: hon-11087 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Steering Stem Conversion Kit, NSR/RS
€128.69
This conversion kit includes the parts you need to convert the complete USD front end from a Honda RS250 NF5/NX5/NA5 to fit the NSR250 MC21/28.
Parts included:
Steering Stem
Top Clamp Collar
Top Nut (TYLY-0027)
Steering Stopper bushes and bolts
To fit the parts you will need to press the RS stem out of the RS lower clamp. Remove the clip from the bottom of the RS shaft and re-fit this to the conversion shaft. Then press back into the RS lower clamp.
The top clamp collar is a press fit into the top clamp, from the top side. this resizes the top clamp to fit the conversion shaft.
Headstock bearings are OEM NSR items, or TYGA taper roller. These must be purchased separately.
The final attack is fitting the steering stoppers. To locate these, loosly fit the converted headstock to the NSR and then turn your steering to left and right, marking the location of the steering stopper positions to give you just enough clearance for no interference with radiator etc. Check and double check position, then drill (dia. 6.8mm) and tap to M8. Use the supplied M8 bolts to secure.
You can now fit the rest of your front end with ease.
TYGA no: TPER-0027
SKU: hon-10836 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all modelsGear 3rd driven z=21 no.15, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl