Licenseplate holder Tyga RGV/RC211V
€55.70
This product holds the registration/license plate for use with our RC211V and RGV seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement.
This product attaches by means of two M5 bolts on an angled back flat plate and could be adapted to be used with other models with a flat undersurface.
TYGA no: BPCX-9007
SKU: alg-10033 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, VFR400RR NC30Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R
€12.23
Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R
Velocity Stacks, NC30, Kit, 4 pcs
€149.37
Fuel Tank, GRP, VFR400R NC30, Unpainted
Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Cover headlight upper cowling (pair) clear, Honda VFR400 – RVF400
€27.34
Cover, (Clear), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9010
SKU: hon-10643 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Seat cowling (grp) stock shape street single, Honda VFR400 NC30
€242.66
Seat Cowling (GRP), NC30, Single, Stock Shape, Street
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC30 seat cowling in the same shape but with RC30 style single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please note:
for similar product but with no taillight holes, please order BPFT-0221.
for similar product but with passenger seat pad area open, same as stock, order BPFT-0021
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFT-0121
SKU: hon-10493 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Collar/manifold Special , NSR250
€62.38
This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.
Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.
The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.
The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.
Compatible with the following TYGA system:
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMN-9003
SKU: hon-10381 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon engine cover right, Honda CBR1000 2008 -15
€110.40
Engine Cover, Right, (Carbon) 2008-15 CBR1000RR
This lightweight carbon cover fits over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-8101R
SKU: hon-10445 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopTYGA / Kitaco Power up kit maggot , Honda MSX125 GROM
€702.49 €632.24
TYGA/KITACO Power Up Kit, Maggot Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0097
SKU: MSX-10306 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop