Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Exhaust set stainless steel, Aprilia RS125
€355.59
.Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125
Cone welded stainless steel exhaust, for your RS125 performance and look!
The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving in weight and increase in power over the stock system. The handcrafted cones are TIG welded together to show the weld rings to maximum affect; this system is a must for the Aprilia RS-125 owner and fits all versions up to and including 2011
This products is the chamber set only and to complete the full replacement exhaust system for your Aprilia RS125 you will need to order a silencer too.
Included in this product:
A.)1 X chamber set (EXCS-0013 or EXCS-0019). When you order this product, you will receive included in the chamber set:
1 X chamber
1 X manifolds with flange and ‘o’ring
2 X manifold to chamber springs
1 X clamp and mounting hardware
Not included in this product is the silencer. Please order separately:
B.)1 X silencer (EXSL-0003, EXSL-0004 OR EXSL-0005) of your choice. Each silencer is provided with mounting hardware and will have a badge attached on the correct side for this system when ordered at the same time.
As is the case with any power upgrade, it is important that you make adjustments to the carburation as necessary. The dyno graph shown had the jetting adjusted one size leaner on the main jet and one clip richer on the needle for optimum performance. However, you will need to adjust your bike’s settings according to your ambient condition. If in doubt, start with a rich setting across the range, and lean off as required. Failure to correctly set up the carburation could result in engine damage.
TYGA no: EXCS-0019Â
SKU: apr-10002 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopSet, Exhaust Chamber, Side By Side Type, Stainless Steel, RGV250 VJ23
€1,010.86
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Tyga step kit replacement brake link, universal
€11.04
This replacement part fits to the Tyga step kit brake lever on the NSR250, NC30/35 etc.
TYGA no: STAC-0001Â
SKU: alg-10244 Categories: ALL products, By model, CNC parts, Hawk/Bros 400/650, Honda, Stock list, all modelsBracket rear brake, 84mm Brembo conversion Silver, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0093
SKU: MSX-10079 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopCarbon tail tidy, Honda MSX125 GROM
€192.56
This trickest tail tidy in the market, made from lightweight carbon fiber, this replaces the huge heavy one provided by Honda. At least Honda made it easy to remove theirs, and ours is quick and easy to install with no modification of components needed. Complete with license plate light and mini turn signals, harness with correct connectors and flasher relay unit to maintain the correct flashing speed. Can be used with stock or TYGA exhaust system. With the way this product transforms your bike, you’d be crazy not to install it.
TYGA no: BPCX-7528
SKU: MSX-10181 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon lower fairing stay, Szuki RGV250 Vj21
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21
These lower fairing stays are direct replacements for the Suzuki OE part numbers 94740-12C0-000 and 94750-12C0-000 on the VJ21 RGV250
Note: left and right are same in our set because the OEM ones are the same except the nut is on the outside (between fairing and stay) on the right side but on the back side on the left side.
So we supply one bush for left side to represent the thickness of the nut that is welded on the stay. On the right, it doesn’t need a bush.
TYGA no: BPCC-0059
SKU: suz-10137 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsCarbon shroud (pair), Honda MSX125 2021-
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7248
SKU: msx-10501 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop