Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsMeter stay RC30 style bodykit, Honda VFR400 NC30
€106.61
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: TYLY-0301
SKU: hon-11425 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Waterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCarbon airbox lid, Honda NSR250 MC16/MC18
€232.17
Race Air Box Lid (Carbon) MC16, MC18
The stock air box is restricted by the size of the inlet holes on the lid which limits the amount of power that can be unleashed from the NSR250. By replacing the stock air box lid with the TYGA Performance version, the inlet to the air box is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has groove so a perfect seal with the air box can be retained. A mesh is supplied in the air box to hold the stock air filter securely in position.
As well as potential power improvements over the stock air box, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9110
SKU: hon-10624 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250 MC18, ShopEngine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partsSet, Exhaust Chamber,Stainless Steel, Yamaha TZR250 3MA
€771.82
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXCS-0051
SKU: yam-10085 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaTYGA bike dust cover two tone Red/white, Honda VF1000R
€85.76
TYGA Bike Dust Cover, Red/White, Honda VF1000R
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
This Red/White Honda VF1000R cover is exclusively made by TYGA-Performance on special request for members of the Honda VF1000R Facebook group and is now available on pre order.
Covers will ship starting from October 2019
Limited production so Pre-Order you VF1000R cover now!
TYGA no: TMER-0118
SKU: alg-10321 Categories: ALL products, Bike covers, Merchandise, Shop, Universal partsCarbon rear hugger, Yamaha R1 2009-14
€133.29
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
TYGA no: BPCH-7402
SKU: yam-10004 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14