Carbon Lower Cowling, NX5 RS250R (late model style)
€521.68
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCL-9036
SKU: hon-10952 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopMikuni main jet # , Suzuki RGV250 /Aprilia RS250
€5.45
Mikuni main jet, Suzuki RGV250 / Aprilia RS250
Choose option below
TYGA no: alg-10106 - alg-10240
SKU: Mikuni 270 - 320 Categories: ALL products, Aprilia, By product, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Suzuki, Various parts, Various parts, Various partsCover headlight upper cowling (pair) paint, Honda VFR400 – RVF400
€35.34
Cover, (paint), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: BPFC-9010paint
SKU: hon-10646 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Shroud left Red, Honda MSX125 GROM
€32.45
Shroud left Valentine Red, OEM Honda part
TYGA no: 83490-K26-900ZB
SKU: MSX-10121 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon bikini fairing, Honda MSX125 GROM
€141.41
Bikini Fairing (Carbon), MSX125 Grom
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in carbon shown here and also in GRP (see BPFU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
TYGA no: BPCU-7128
SKU: MSX-10185 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopVHM piston (15mm piston pin) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521708 + size
SKU: alg-10400 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsSet exhaust without header, race system without silencers
€409.54
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0093
SKU: ktm-10094 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopUndertray seat, Ninja 400
€60.24
Undertray, Seat, (GRP) Ninja 400
Replacement undertray for TYGA Seat Cowling BPFT-7040(p)
TYGA no: BPFX-7040
SKU: kaw-10136 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-