Step kit replacement right side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement Right Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0048B
SKU: ktm-10088 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsFork cap kit, Honda RVF750R RC45
€317.71
After 20 years or so of use, many RC45’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any R45 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original RC45 rebound damper rod is required, so please follow the instructions carefully.
Front fender grp, stock shape painted NC23 – NC29 – NC30
€123.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFF-0005rosswhite
SKU: hon-11398 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Exhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopTriple clamp set CNC silver, Suzuki RGV 250
€577.21
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0246
SKU: suz-10022 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiTyga Step Kit Replacement Link Rod, 110mm
€17.49
Tyga Step Kit Replacement Link Rod, Male, 110 mm.
Uses M6x1 thread in one end and M6x1 L/H thread in the other.
Handle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all models