Carbon frame covers pair (frame with steering damper) , Suzuki RGV250 VJ21
€341.09
Frame Cover, Pair, Carbon, RGV250 VJ21
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note this set is for frames with a steering damper mounting boss 180mm measured from edge of the wiring hole.
Note that some examples of the VJ21 had no steering damper mounting boss, please order set BPCC-7121. Also some other frames have the steering damper mounting boss in a different position. For those frames, please order set BPCC-7121 for frames with no damper mounting boss and cut a hole to suit.
TYGA no: BPCC-7021
SKU: suz-10155 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsCarb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
Clutch Steel Plate B, MC28SP
€27.26
Clutch Steel Plate B, MC28SP
TYGA no: 22322-KV3-780
SKU: hon-11153 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Tank filler cap racing (forward fill hole type), KTM 7 hole
€69.87
<p><strong><span>Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole</span></strong></p>
<p><span>This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves</span></p>
<p><span>Supplied complete with seals and mounting hardware, it can be installed in minutes.</span></p>
<p><span>This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)</span></p>
<p><span>Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap.</span></p>
<p><span>Suitable for the following models:</span></p>
<p><span>KTM</span></p>
<ul>
<li><span>KTM RC125</span></li>
<li><span>KTM RC200</span></li>
<li><span>KTM RC250</span></li>
<li><span>KTM RC390</span></li>
**** Please check photo 2 ****
</ul>
TYGA no: TYLY-0223
SKU: alg-10318 Categories: ALL products, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Shop, Tank fillers, Various parts, Various partsGear output shaft no.12, RGV250/RS250
€151.57
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Front Fork Preload Adjusters blue/red (Pair), Honda CBR250/CBR300
€194.60
Front Fork Preload Adjusters, Pair, CBR250R/CBR300R
These fully functional preload adjusters replace the blank end caps on the stock CBR250R front suspension. These caps allow the rider to increase or reduce the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
Also supplied are shorter preload spacers, which when fitted allow preload to be reduced (softer) from the stock setting by 3mm, and increased (stiffer) by 9mm, giving a total 12mm adjustment.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional
TYGA no: TYLY-0067
SKU: hon-10434 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, Honda, Shop, Universal parts, Various parts, Various partsSilencer stainless steel Motogp style (4 stroke) 64mm maggot
€261.60
Silencer stainless steel Motogp style (4 stroke) 64mm &ldquo;maggot&rdquo; (alg-10222) Maggot silencer with 64 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe.
&nbsp;
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application. Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
&nbsp;
<a title= Maggot 64mm href= {{media url= wysiwyg/06-maggot-exsl-0053-64mm-3fe5ec5c.PDF }} target= _self >Click here for PDF</a>
TYGA no: EXSL-0053
SKU: alg-10222 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, Shop, SilencersTail tidy street legal set , Honda MSX125 2021-
€101.18
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: TYLY-0274
SKU: msx-10498 Categories: ALL products, Honda, MSX125 2021-, Shop, Various parts