Subframe, GP Race Tail, NSR250, Assy.
€123.00
This strong but lightweight subframe replaces the stock item when used as part of the NSR250GP Race Tail kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Supplied with a lightweight undertray and stainless steel bolts to attach the tank and regulator/rectifier as well as cable ties for securing the wiring.
Compatible Parts:
Only to be used with NSR250 GP Race Tail kit, BPFT-9002 MC21 seat cowl, BPFT-90012 MC28 seat cowl, subframe TYLY-0007, battery box TYLY-0006, seat pad BPSP-0001, Taillight BPLT-0008 and plate holder BPFX-9006, recommend BPAC-0001 rear brake reservoir kit
TYGA no: TYLY-0007
SKU: hon-10827 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28Tank filler cap racing , Yamaha/Ducati
€69.87
Tank Filler Cap, Keyless, Racing Type, Yamaha/Ducati
This keyless racing fuel tank filler cap is CNC machined from billet alminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
YAMAHA
- R6 (All Years
- R1 (All Years)
- FZ-6 (All Years)
- FZ-1 (All Years)
- FZR1000 (All Years)
- FZR750 (All Years)
- FZR400 (All Years)
- FZR250 (All Years)
- TZR250 3MA, 3XV
- YSR50 (All Years)
- YZF1000 (1997-98)
- YZF600 (1994-97)
- YPVS-F2 RD350/RZ350 (1986)
Ducati :
- 748 (all years)
- 851 (all years)
- 888 (all years)
- 916 (all years)
- 996 (all years)
- 998 (all years)
- Monster S4R S2R etc.. (all years)
- 600 750 and 900 SS (all years)
- 600 750 900 ST2 ST4 (all years)
- 848, 1098, 1198 (all years)
- Desmo RR
TYGA no: TYLY-0111
SKU: alg-10191 Categories: 848 / 1098 / 1198, ALL products, Desmosedici RR, Ducati, Monster, Shop, Tank fillers, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
€1,373.19
Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0135
SKU: hon-11043 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97 Tag: Exhaust systemsUpper Cowling Race, (GRP) NX5 RS250R (late model style)
€318.90
Upper Cowling (GRP), NX5 RS250R.
This upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036
Requires screen SCRE-0168
TYGA no: BPFU-9036
SKU: hon-10908 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopRubber Grommet type 2
€0.78
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 5046-042-00
SKU: alg-10420 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CMirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Carbon heel guard suitable Left and right, Yamaha R25/R3
€40.16
Replacement left heel guard for Tyga step kits, see model below. Suitable for left and right side.
STAA-0025
TYGA no: BPCC-0019
SKU: yam-10055 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3