Upper cowling stock shape painted RT, Honda RVF400 NC35
€545.50
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings but indicator positions smoothed off. Should be used with BPFL-0103 (Painted RT)
TYGA no: BPFU-0029 (Painted RT)
SKU: hon-10519 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopRear seat (under) RC211V, CBR400RR
€159.16
Rear Fender/luggage compartment specially designed to be used with our RC211V style seat cowling for the NC23. This incorporates mounting points for registration/number plate and turn signals which can be cut down for race use.
Decal set, type 9 astroid black scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 9, 2015 Asteroid Black Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026X
SKU: MSX-10317 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopLower Cowling (Carbon), NC30, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC30, GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0146
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9034.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
Carbon airbox cover right, Honda Monkey 125 2018-
€208.71
Carbon airbox cover right, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7242R
SKU: msx-10437 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopExhaustset race Stainless steel Silencer aluminium round , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round aluminium silencer EXSL-0047 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0053
SKU: hon-10358 Categories: 4 stroke exhaust sets, ALL products, By model, By product, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Front fender (GRP), NX6 NSR500V
€102.49
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Fuel Tank, GRP, VFR400R NC30, Painted Type 1
€1,381.75
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFG-0005type1
SKU: hon-11406 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30