TYGA 300cc Bigbore Top End Rebuild Kit
€135.19
The kit includes all piston assy and gasket parts to rebuild one cylinder on your NSR300. For complete overhaul to both cylinders, please order two kits.
TYGA no: TPER-0016
SKU: hon-10826 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
€588.29
Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
This CNC machined triple clamp set has been modified from the ‘normal’ NC35 design to allow MC28 owners to fit NC35 forks to their machine.
The difference between the NC35 clamps and these is that we have replaced the steering shaft with one of suitable length for the MC28.
Pro arm wheel spacer, Honda MC28 NC30 NC35
€18.14 – €18.50
Pro Arm rear wheel spacer (flat fitment type). Machined from 7075 T6 aluminium. Light weight and attractive. Available in four colours, red, gold, blue and black.
This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the MC28, NC30 and NC35. Not suitable for the RC30, RC45, RS250 or NR which uses a taper fit design (see TYLY-0196).
TYGA no: TYLY-0096-TYLY-3096
SKU: hon-10522-hon-10525 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, VFR400RR NC30Set exhaust, race system double stainless oval/carbon cap , KTM RC390 2014 – ’21
€1,107.21
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.Update your bike with this great TYGA performance, KTM power part!!Model 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with decibel killers for noise reduction.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0092 for similar system qith Moto Maggot silencers.CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your applicationPerformance and DynographPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore. No decibel killer used.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0091
SKU: ktm-10093 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopCarbon heel guard suitable Left and right, Yamaha R25/R3
€40.16
Replacement left heel guard for Tyga step kits, see model below. Suitable for left and right side.
STAA-0025
TYGA no: BPCC-0019
SKU: yam-10055 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Racing stepkit silver/RED adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Silver with Red Slot Cover, MSX125 Grom
With all major components desgned specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
<br />You can only use these steps on the MSX125SF if you have a TYGA high level exhaust
&nbsp;
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-0019RED
SKU: MSX-10237 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, StepsSection header stainless exhaust, Honda MSX125 GROM
€78.12
Section, Header, Stainless, MSX125 Grom
TYGA no: EXPT-0035
SKU: MSX-10138 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopFuel Tank, carbon, HONDA VFR750R RC30
€1,362.72
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.