Lower Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
€382.54
Lower Cowling, Race, Carbon Unpolished KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531 (Carbon Clearcoated)
Exhaustset race Stainless steel Silencer Stainless steel oval , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0017
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0012
SKU: hon-10102 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carbon silencer guard (race) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0047
SKU: ktm-10143 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsPower controller for tyre warmer assy
€148.05
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These wamers are designed for Superbikes running the usual 120 front tyre, and 190-200 section rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0007
SKU: alg-10255 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR900RR 1992- 95, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, Honda, Kawasaki, Shop, Suzuki, Tyre warmers, VFR750R RC30, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, ZX10R 2011 -15Bearing, Countershaft, NSR250 MC18, MC21, MC28
€11.30
This NSK bearing is a high quality, direct replacement for OEM bearing 91024-KV3-003.
Extensively tested and used on many TYGA engines.
TYGA no: TYPP-0006
SKU: hon-10838 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Universal parts, Various parts, Various parts, Various partsSeat cowling passenger, KTM RC125/RC200/RC390
€150.56
Seat Cowling, Passenger, (GRP), KTM RC390
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of GRP is much lighter and can be painted to match your bike. Finished in primer, ready for painting, this product is supplied with all mounting hardware. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFT-7231
SKU: ktm-10065 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopSilencer clamp double 60mm (double bolt)
€34.12
This GP silencer clamp is specifically designed TYGA GP style expansion chambers for the Suzuki RGV250 and Aprilia RS250.
Designed to securely clamp 60~61mm O.D. silencers, and then mounts the silencers rigidly to the original mounting bracket.
Also for use with TYGA Suzuki RGV250 bodywork.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0006
EXCS-0008
EXCS-0010
EXCS-0011
EXCS-0018
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0012
SKU: alg-10022 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ22, RS250, ShopFront Fender, Carbon, Stock Shape, VJ21
€190.60
Front Fender, Carbon, Stock Shape, VJ21
Real carbon fibre reproduction of the stock Suzuki RGV250 VJ21 front fender.
Finished in high gloss, adds beauty and reduces unsprung weight. (Weight of part approx. 0.26 kg)
TYGA no: BPCF-0019
SKU: suz-10127 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250