O-Ring, Main shaft, MC21/28SP
€2.18
O-Ring, Main shaft, MC21/28SP
TYGA no: 91303-KV3-780
SKU: hon-11076 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Mirror, Right Hand, Ninja 250R/300R 2013 -18
€63.94
Mirror, Right Hand, Ninja 250R/300R 2013 -18
TYGA no: 56001-0240
SKU: kaw-10161 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopTemperature Sensor, MC21
€62.70
Temperature Sensor, MC21
TYGA no: 37750-PC1-004
SKU: hon-11079 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Water pump shaft/gear, Honda NSR250 MC28
€255.37
Water Pump Shaft/Gear, MC28
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003
TYGA no: TPER-5004
SKU: hon-10623 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various partsExhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopSeat Panel, Left, Ebony, Ninja 250R 2008 -12
€55.10
Seat Panel, Left, Ebony, Ninja 250R 2008 -12
TYGA no: 36040-0114-H8
SKU: kaw-10201 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSet pipe Full race system WSS300 (street), KTM RC390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM RC390
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete systems with silencer please see EXPS-0111 and EXPS-0112
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Compatible TYGA-Performance Belly Pans are:
BPFL-7431 ( GRP)
BPFL-7431 ( GRP, Painted White)
BPCL-7431 (Carbon)
TYGA no: EXPS-0113
SKU: ktm-10170 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsFront Fender, (GRP), Unpainted, MSX125
€80.45
Front Fender, (GRP) Unpainted, Stock Shape, MSX125SF
Direct replacement for original part.
This is a part made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
This Front Fender has the same shape as the second generation MSX125SF stock front fenders, and will also fit the first generation MSX125 /Grom
TYGA no: BPFF-7428
SKU: MSX-10397 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020