Silencer stainless round, 2" x 380mm
€230.91
Silencer, Stainless, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2" external diameter tail pipe, this silencer uses a 4" x 380 mm. outside Stainless tube.
* Please note that decibel killer model EXDK-0003 is compatible but not included with this exhaust system. Please add EXDK-0003 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0079
SKU: hon-11010 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSeat Lock, Universal, Assy
€23.44
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0047
SKU: hon-11522 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsSeal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Upper cowling Suzuka, NC30
€253.86
opular replacement upper cowling, includes fitting hardware and headlight cover.
You will need to order spotlight BPLT-0001.
Uses NC30 screen
SCRE-0036, SCRE-0037, SCRE-0038, SCRE-0039, SCRE-0040
Uses NC30 stock shape lowers
BPFL-0003
To keep costs down, you can fit this upper using your existing screen and lower fairing.
TYGA no: BPFU-0010
SKU: hon-10085 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Wheel, Rear, Aluminium Spacer Kit, Ninja 400
€28.25
Wheel, Rear, Aluminium Spacer Kit, Ninja 400
Replace the heavy steel rear wheel spacers with these “self-retaining” lightweight 6061-T6 aluminium spacers.
The outer spacers are designed with a lip that slips in behind the seal to retain the spacers in the wheel. No more lost spacers rolling across the workshop floor!
Lighter weight allows the suspension to react more positively, so better handling and good looks!
TYGA no: TPER-0058
SKU: kaw-10096 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsSection, Secondary A, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-7151
SKU: hon-11344 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93VHM piston (flat top) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521750 + size
SKU: alg-10399 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM products