Subframe, GP Race Tail, NSR250, Assy.
€123.00
This strong but lightweight subframe replaces the stock item when used as part of the NSR250GP Race Tail kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Supplied with a lightweight undertray and stainless steel bolts to attach the tank and regulator/rectifier as well as cable ties for securing the wiring.
Compatible Parts:
Only to be used with NSR250 GP Race Tail kit, BPFT-9002 MC21 seat cowl, BPFT-90012 MC28 seat cowl, subframe TYLY-0007, battery box TYLY-0006, seat pad BPSP-0001, Taillight BPLT-0008 and plate holder BPFX-9006, recommend BPAC-0001 rear brake reservoir kit
TYGA no: TYLY-0007
SKU: hon-10827 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28Set, pipe full race system stainless maggot silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system stainless maggot silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0130
SKU: hon-11023 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Set exhausts side by side stainless steel, Honda NSR250 MC21
€769.95
The ultimate set for your Honda NSR250 NSR300!!
Set exhausts side by side stainless steel, Honda NSR250 MC21/MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Our TYGA Performance Honda NSR250 two stroke motorcycle expansion systems are now THE system to have gracing your NSR250. And why not? TYGA pipes for NSR 250s are available for MC21 and MC28 models and there are two styles of chamber to choose from:
Tyga Side By Side (SS) which exit conventionally on left and right
For more information on how to get the best power out of this system, combine it with other parts of our MC21 Power Up Kit (see under ‘technicical help’ on right hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)Important when ordering
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0005a
SKU: hon-10260 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC21, ShopCarbon engine cover (right),(5 speed engine) Monkey 2022-
€93.94
TYGA no: BPCC-7542
SKU: msx-10516 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2021-, ShopExhaust stay GP-T, Honda RVF400 NC35
€71.27
This exhaust stay is designed to be used with our GP-T kit for the NC35 and attaches to subframe TYLY-0133. Note for NC30, use TYLY-0174
TYGA no: TYLY-0175
SKU: hon-10592 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Carbon seat cowling, RD250/350LC (4L1/4L0)
€207.19
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
VHM Cyl. Headset Honda CR250 ’05-’07
€347.95 €303.33
VHM Cyl. Headset Honda CR250 ’05-’07 (alg-10213) AA33084VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (20.20cc)Optional inserts:– blind– 19.80– 20.60This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33084Â Â Â Â Â Â Â Â
SKU: alg-10213 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsHandlebar Clamp, Right, Black, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-1469