Seal Thermostat Housing, MC18~28
€11.04
Seal Thermostat Housing, MC18~28
TYGA no: 19305-KV3-010
SKU: hon-11078 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Carbon rear hugger, Yamaha YZF-R125 2009-
€180.92
Rear Hugger (Carbon), Yamaha YZF-R125 2009-2014.
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
Exhaust set stainless steel, Honda NSR150
€346.46
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder head for use on the NSR150SPThe VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (14.20cc)Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Set exhaust, race system double stainless silencers oval/carbon cap , KTM RC390 2014 – 2016
€962.68
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.
Update your bike with this great TYGA performance, KTM power part!!
Model 2014 – 2016
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction.
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0061
SKU: ktm-10060 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopPassenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopTYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopFork Top Kit Honda NX5 RS250
€311.06
Fork Top Kit, NX5 RS250R
After 20 years or so of racing and hard use, many NX5 RS250Rs have damaged or scruffy fork tops with faded adjusters. The components are not available from Honda and from personal experience we know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork tops both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the bright blue anodizing, just like the original HRC parts, these fork tops are the finishing touch of any NX5 restoration and install exactly the same as the original HRC ones.
TYGA no: TPER-0056
SKU: hon-10896 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopClutch plate B, Honda NSR250 MC21/MC28
€45.13
Clutch plate B, Honda NSR250 MC21/MC28
TYGA no: 22202-KV3-980
SKU: hon-10574 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various parts