Silencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet full race system under belly with long stainless silencer + carbon side cover, Honda Monkey 125 2018- BP5624
€731.40
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long, with Carbon Side Cover
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted stainless silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. This set includes Carbon Side Cover BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0107) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0108 Stainless, Underbelly, with short silencer
Carbon upper cowling street with air duct, Aprilia RS250 Tyga, assy
€726.62
This upper cowling is to be used in our Aprilia RS-250 kits, BPFS-0100 and BPFS-1100
This product is compatible with lower cowling BPFL-9030 and BPCL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPCU-9030
SKU: apr-10070 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopClutch Spring Dry, MC28 SE/SP
€4.91
Clutch Spring Dry, MC28 SE/SP
TYGA no: 22401-KV3-840
SKU: hon-11149 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Handle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2022-
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1531
SKU: ktm-10215 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsExhaust Gasket, Spring, NSR150/250
€66.78
Exhaust Gasket, Spring, NSR150/250
TYGA no: 18293-KV3-004
SKU: hon-11163 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Kitaco I-Map, Honda MSX125 GROM
€136.63
KITACO i-Map Fuel Injection Controller
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
Fitting the i-Map to your MSX Grom requires splicing into the wire harness. Instructions can be seen here:
http://www.kitaco.co.jp/data/product/link/instaling_manual/imap_grom/kitaco_installing_manual_grom_imap.html
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
Mapping :
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tuneable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432010
SKU: MSX-10309 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTop Triple clamp CNC black , Suzuki RGV 250 VJ22kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1046
SKU: suz-10054 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, Suzuki