Carb Service Kit A, 32 pieces, Yamaha FZR400 1WG
€55.41
Carb Service Kit A, 32 pieces, Yamaha FZR400 1WG
LiteTek Carburettor Seal Kit to suit: Yamaha FZR400 1WG
Carburettor Model: Mikina BD32
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-004 Float Bowl Ring, Material: Flourosilicone (OE part number: 1WG-14147-00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A ( Part of Yamaha Assembly: Part Number 12R-14105-00 )
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number:N/A)
4x OR-010 Float Needle Assy O-Ring Material: Viton 70A (Part of Yamaha Assembly: Part Number: 1HX-1410A-00-00 )
4x SR-004 Main Jet SQ ring, Material: Viton70 A (OE part number: 1AE-14227-00)
12x OR-007 Fuel Tee O-Ring, Material: Viton 70A (OE part number: N/A)
Handlebar set silver, Kawasaki ZXR250/300 2008 –
€247.58
Handlebar Set, Silver, Ninja 250R, 300R. Fits all models from 2008 to present.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
The handlebars allow for adjustment rotating around the fork leg for personal preference by use of two shims supplied, and are totally independant of the front fork allowing for stock or alternative fork leg position in triple clamps as well as installation of pre-load adjusters.
TYGA no: TYLY-0869
SKU: kaw-10034 Categories: ALL products, CNC parts, Kawasaki, Ninja 250R/300R 2013 -, ShopKit, Fairing Set, NC30, Stock Shape, Painted Type 1
€979.15
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0216
SKU: hon-11405 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Seat set Tyga doubleseat, NC30
€264.89
This is the GRP seat cowling used in the NC30 Two Seat Cowling kit, BPFS-0078.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
rear fender special BPFX-9117
taillight BPLT-0013
TYGA no: BPFT-9117
SKU: hon-10090 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Top Triple Clamp, CNC black, VTR1000 SP1
€239.09
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1058(p)
SKU: hon-10934 Categories: ALL products, CNC parts, Honda, Shop, VTR1000Sp1SP2Carbon Seat set street GP-T, Honda RVF400 NC35
€1,913.80 €1,722.42
The ultimate seat set for your V4 Honda!
This modern seat cowling, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0151 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0149
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0151
SKU: hon-10604 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Silencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted
€95.39
Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0070
SKU: hon-10903 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopLower cowling stock , Honda VFR750 RC30
€225.28
Lower cowling “stock “, Honda VFR750 RC30 (hon-10566)
Direct replacement for OEM Honda lower cowling and made to similar thickness as the Honda one for faithful reproduction, strength and stiffness. Can be used with TYGA Performance or factory Honda RC30 upper cowlings