VHM piston (flat top) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521750 + size
SKU: alg-10399 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsTuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsExhaustset stainless steel, oval carbon silencer w carbon cap, Honda PCX150
€552.31
Set, Pipe, Full Race System, Oval Carbon Silencer, Carbon End Cap, PCX150
This full race system has been specifically designed for the PCX150 to maximise power. Made in stainless steel with spring mounted carbon silencer with carbon end cap, this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a round carbon silencer with carbon end cap EXSL-00048
TYGA no: EXPS-0057
SKU: hon-10472 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, PCX150, ShopSilencer clamp double 60mm (double bolt)
€34.12
This GP silencer clamp is specifically designed TYGA GP style expansion chambers for the Suzuki RGV250 and Aprilia RS250.
Designed to securely clamp 60~61mm O.D. silencers, and then mounts the silencers rigidly to the original mounting bracket.
Also for use with TYGA Suzuki RGV250 bodywork.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0006
EXCS-0008
EXCS-0010
EXCS-0011
EXCS-0018
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0012
SKU: alg-10022 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ22, RS250, ShopPillion seat cover “GRP”, KTM RC390 2022 –
€81.19
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731
SKU: ktm-10211 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsTYGA step kit replacement left side hanger (adj), Ninja 400
€35.12
TYGA Step Kit Replacement Left Side Hanger, (Adj) Ninja 400, Assy
For STAA-0026
Cowling, Side, RH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0272-777
SKU: kaw-10197 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopClutch Lever TYGA CNC flip up ,Honda NSR250 MC21/MC28 VFR400/RVF400
€54.27
CNC machined from solid billet, these flip up type levers are made to a very high standard and are adjustable for reach and length.
They look great on the bike, and also work perfect. Designed in house by TYGA Performance
TYGA no: LEVC-7002
SKU: hon-10499 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30