Upper fairing set street RC211V, CBR250RR MC22
€451.91
This set of bodywork comprises of the parts shown below which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock MC22. It fits to the original meter and mirror stays and uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Stay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various partsTyga Step Kit Replacement Left Side Hanger, MC21/28 Riser Assy.
€76.20
Replacement left hanger for MC21/28 STAA-0018 TYGA Step Kit. Complete with mounting bolts and bushes.
Section, Right #1, KTM RC390 Serpent
€45.13
Section, Right #1, KTM RC390 Serpent
TYGA no: EXPT-0055
SKU: ktm-10118 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsFuel Tank, GRP Unpainted, RC36-2 RC30 style
€1,156.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFG-0009
SKU: hon-11459 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
€43.36
Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-011 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x WS-018 Vacuum Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
4x CS-004 Choke Plunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT7-003 or 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKB-Honda-MC19
SKU: alg-10362 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaSet, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, 3rd Gen, 90-93
€1,396.31
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0155
SKU: hon-11325 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon set, Aprilia RS125 (2007-2010)
€412.40
Let you Aprilia Rs125 stand out from the crowd with these beautiful carbon fiber parts, a complete set for the 2007-2010 Aprilia RS125.
Parts are:
Front fender
Rear hugger
Chain guard
Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
TYGA no: BPFS-0074
SKU: apr-10005 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, Shop