Carbon rear hugger, Honda CBR500
€252.04
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as keep road dirt and water away from the rear shock and linkages. Modelled off the genuine plastic Honda aftermarket part but crafted in high quality carbon this products is suitable for the CBR500R, CB500X and CB500F.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Tyga Step Kit Replacement Gear Shift Lever, Silver
€64.46
Replacement gear lever for your TYGA Step Kit. Silver. Complete with bearings.
Top Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiSet pipe full system with carbon oval silencer, Honda Monkey 125 2018-
€413.39
Set, Pipe, Full Race System, High Level, Monkey 125, Carbon Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Stainless Oval High level System for Honda Monkey 125
Front fender “stock type” painted Rothmans , NSR250 MC18/21/28
€157.94
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFF-0009rothmans
SKU: hon-11278 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, Shop, SilencersCarbon meter cover, NSR250 MC28
€36.50
Attractive carbon cover for MC28 meter assembly.
For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts
TYGA no: BPCC-0001
SKU: hon-10245 Categories: ALL products, Bodywork and carbon, Carbon, Honda, NSR250 MC28, Shop, Various partsCollar manifold, VFR750F gen 3 and 4, 90-97
€8.68
Collar manifold, VFR750F gen 4, 94-97
Collar manifold, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMN-0119
SKU: hon-11030 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Belly pan (GRP/carbon) RED, Honda MSX125 GROM
€309.98
Belly Pan, (GRP/Carbon), MSX125, painted Valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7228 R
SKU: MSX-10192 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop