Carbon hugger, Ducati monster 796/1100
€118.51
Hugger, (Carbon), Ducati Monster, 796, 1100
Carbon engine covers right), KTM Duke – RC390
€120.42
Engine Cover, (Carbon), Right, KTM Duke – RC390
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCC-7331R
SKU: ktm-10058 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 390, RC390 2022-, ShopSilencer stainless steel round 86mm (4 stroke) 38,1mm
€259.22
This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
TYGA no: exsl-0019
SKU: alg-10111 Categories: 4 stroke exhaust sets, ALL products, By model, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, Exhausts, Honda, Shop, SilencersSteering Stem Conversion Kit, NSR/RS
€128.69
This conversion kit includes the parts you need to convert the complete USD front end from a Honda RS250 NF5/NX5/NA5 to fit the NSR250 MC21/28.
Parts included:
Steering Stem
Top Clamp Collar
Top Nut (TYLY-0027)
Steering Stopper bushes and bolts
To fit the parts you will need to press the RS stem out of the RS lower clamp. Remove the clip from the bottom of the RS shaft and re-fit this to the conversion shaft. Then press back into the RS lower clamp.
The top clamp collar is a press fit into the top clamp, from the top side. this resizes the top clamp to fit the conversion shaft.
Headstock bearings are OEM NSR items, or TYGA taper roller. These must be purchased separately.
The final attack is fitting the steering stoppers. To locate these, loosly fit the converted headstock to the NSR and then turn your steering to left and right, marking the location of the steering stopper positions to give you just enough clearance for no interference with radiator etc. Check and double check position, then drill (dia. 6.8mm) and tap to M8. Use the supplied M8 bolts to secure.
You can now fit the rest of your front end with ease.
TYGA no: TPER-0027
SKU: hon-10836 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all modelsKevlar ECU cover, Honda NX5
€126.42
Cover, Kevlar, ECU, NX5 RS250R
Kevlar replacement part for Honda/HRC part number: 20260-NX5-000
TYGA no: BPCC-0129
SKU: hon-10698 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsHandle bar tube TYGA,
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm).
Comes fitted with plastic bungs in each end.
Aluminium fairing stay, Honda VFR400 NC30
€130.42
Direct replacement for stock item, 50% of the weight
Compatible Parts:
Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only
Please note:
This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.
Beautiful, perfect fitment and give your bike that HRC look.
Seat Cowling (GRP), NSR250 MC21, Stock Shape, Street, Painted Rothmans
€713.10
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFT-0044Painted
SKU: hon-11283 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, Silencers