Carbon parking brake
€42.86
Carbon parking brake (alg-10177)
The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations:
-When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand
-Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle
-Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc.
Don’t worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature.
It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you’ll be surpised how handy it is!
Designed by Zanti factory
TYGA no: TYTO-0030
SKU: alg-10177 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Honda MX, Husqvarna MX, Kawasaki, Kawasaki MX, KSR110 2005- 10, KTM, KTM MX, Mito 125, Monster, Motocross, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, Suzuki MX, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2, Yamaha, Yamaha MX, YZ250 2005-15, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CSidehanger right, Aprilia RS250 (Tyga)
€84.04
Replacement right hanger for your Aprilia RS-250 TYGA Step Kit. Complete with mounting hardware and bushes.
TYGA no: STAH-0010
SKU: apr-10032 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopSection, Final, Stainless, Yamaha R25/R3
€147.90
Section, Final, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Handlebar Clamp, Right, Black, 41 mm.
€93.45
Replacement Right handlebar clamp for handlebar set TYLY-1077
Set full race system with stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap, First Generation
This full race system has been specifically designed for the MSX125 to maximise performance and looks.The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).
A useful gain all through the range, increasing as the revs rise up to maximum.
The silencer was full bore. No decibel killer used.
Similar Products:
Please also see:
EXPS-0042 Moto Maggot System
EXPS-0041 Carbon Oval Silencer System
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0052Â
SKU: MSX-10277 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopHandlebar set 41 mm, silver
€216.82
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.
7 degree angle for a comfortable, yet sporty feel.
BMW Strada
Honda CB-1 89-90
Honda CBR1000F 93-96
Honda CBR400 NC23/29
Honda CBR600F2
Honda CBR600F3
Honda Hawk 650 RC31
Honda NSR250 MC18/21/28
Honda VFR400 NC30
Honda VFR750 90-97
Honda VTR1000 98-02
Kawasaki EX650R 06-09
Kawasaki ZX10 88-90
Kawasaki ZX6E
Kawasaki ZX6R 95-97
Suzuki GSF400/600 Bandit
Suzuki GSXF600/750/1100 Katana
Suzuki GSXR750/1100 86-87
Suzuki RGV250 VJ21
Suzuki SV650 99-09
Yamaha FZR750
Yamaha YZF600 94-95
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-0077
SKU: alg-10088 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, Shop, Various parts, VFR400RR NC30Silencer kevlar/carbon 60mm 2 stroke
€156.20
This high quality lightweight silencer is made from CNC machined end caps joined by a carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0003 carbon
EXSL-9005 aluminium
If you want to fit this silencer to your 2 stroke and you don’t have a TYGA chamber, this is possible but please also order alg-10002 (tper-0022).
TYGA no: EXSL-0004
SKU: alg-10008 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopHi-Flo Snorkel, Air Box, RGV250 VJ23
€47.21
Hi-Flo Snorkel, Air Box, RGV250 VJ23
This Hi-Flo Snorkel is dyno developed in-house by TYGA Performance to eliminate the restriction of the standard VJ23 air box snorkel.
The RGV250 VJ23 has it’s true potential restricted in three main areas; Exhausts, CDI and of course the standard air box snorkel.
While just replacing the snorkel will obviously have a small benefit, it is best used in conjunction with our other VJ23 power up parts.
Available in Black/Red and All Black please choose your preferred colour in the options below.
Please see TPER-0082 for all the parts you need to build the ultimate VJ23 street weapon!
This is a 3D printed product using tough and durable materials. Some surface imperfections may be visible, but this in no way affects the fit or performance of the product.
We have 2 color option, Red/black and all black.
please specify in comment box at checkout what color you want.