Rear sprocket aluminium gold, ZXR250/300 GSX600/750/1000 R6/R1/R25/R3
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0103-42TÂ - TYSR-0103-47TÂ
SKU: alg-10156 - alg-10161 Categories: ALL products, By product, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Sprockets, Various parts, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R25/R3Set full race system under belly with short stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Short
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0108
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0110) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Seat cowling, Aprilia RS250 Tyga, assy
€243.41
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-0102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPFT-9030Â
SKU: apr-10046 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopKit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
€610.53
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0198 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0197
SKU: hon-11056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
Kit, Single Seat Cover Conversion, Ninja 250, Ebony 2008 -12
€192.08
Kit, Single Seat Cover Conversion, Ninja 250, Ebony 2008 -12
TYGA no: 99996-1364-H8
SKU: kaw-10190 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFront fender grp, stock shape painted NC23 – NC29 – NC30
€123.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFF-0005rosswhite
SKU: hon-11398 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Top triple clamp silver set, CBR250 2011 –
€280.14
CNC machined top triple clamp with detachable ignition switch/lock holder for your CBR250R and CBR300R. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and ignition switch/lock holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0069
SKU: hon-10189 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, Shop