Section Final stainless WSS300 race system, KTM RC390
€379.52
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0078
SKU: ktm-10136 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSeat set with carbon street, Honda NSR250 MC28
€647.60
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0005Â
SKU: hon-10241 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopSeat set street RC211V, NC35 kit
€749.18
This set of bodywork is designed to replace the NC35 stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0029 (street, carbon)
BPFS-0030 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0035
SKU: hon-10136 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopHandlebar set 41 mm, black
€216.82
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.
7 degree angle for a comfortable, yet sporty feel.
BMW Strada
Honda CB-1 89-90
Honda CBR1000F 93-96
Honda CBR400 NC23/29
Honda CBR600F2
Honda CBR600F3
Honda Hawk 650 RC31
Honda NSR250 MC18/21/28
Honda VFR400 NC30
Honda VFR750 90-97
Honda VTR1000 98-02
Kawasaki EX650R 06-09
Kawasaki ZX10 88-90
Kawasaki ZX6E
Kawasaki ZX6R 95-97
Suzuki GSF400/600 Bandit
Suzuki GSXF600/750/1100 Katana
Suzuki GSXR750/1100 86-87
Suzuki RGV250 VJ21
Suzuki SV650 99-09
Yamaha FZR750
Yamaha YZF600 94-95
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1077
SKU: alg-10087 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, Shop, Various parts, VFR400RR NC30Gearbox clutch shaft z=11 no.1, RGV250/RS250
€162.65
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Stay pair cowl. RC30 style, Honda VFR400 NC30
€27.69
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPSY-0237
SKU: hon-11427 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Section intermediate stainless exhaust, Honda MSX125 GROM
€64.13
Section, Intermediate, Stainless, MSX125 Grom
TYGA no: EXPT-0036
SKU: MSX-10139 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopPro arm wheel spacer, Honda MC28 NC30 NC35
€18.14 – €18.50
Pro Arm rear wheel spacer (flat fitment type). Machined from 7075 T6 aluminium. Light weight and attractive. Available in four colours, red, gold, blue and black.
This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the MC28, NC30 and NC35. Not suitable for the RC30, RC45, RS250 or NR which uses a taper fit design (see TYLY-0196).
TYGA no: TYLY-0096-TYLY-3096
SKU: hon-10522-hon-10525 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, VFR400RR NC30