Seal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Seat set with carbon street, Honda NSR250 MC21
€714.98
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts shown below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0003
SKU: hon-10225 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopKit, Bodywork, GRP, stock shape, with Carbon tank, NSR250 MC28, Painted Rothmans
€3,430.87
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0186
SKU: hon-10968 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCover, Lower Left, Carbon, Assy, VFR750 3rd Gen, 90-93
€153.21
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPCX-7049
SKU: hon-11339 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon set, Aprilia RS250
€354.55
Carbon set, Aprilia RS250
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
A set contains:
Front fender
Rear Hugger
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0050
SKU: apr-10020 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSet, mirror blanking plates L&R CNC black, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-1185
SKU: ktm-10191 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsSilencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
€216.73
Silencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
The Dimensions of this silencer are as follows:
I.D. 44.5mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
Front Fork Preload Adjusters black/gold (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.