Bodykit complete MiniRacerXtreme, Honda MSX125 GROM
€1,540.86
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Seat set race RC211V, NC30 kit
€526.82
Seat set race RC211V, NC30 kit
This set of bodywork is designed to replace the stock NC30 seat cowling with the race version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This kit gives a roomier riding position and enhanced modern looks over the stock bike.
This product is suitable for the NC30 and is the race version without the street gear. We also offer two street versions of the same product which also include an LED Tailight and a registration/license plate holder.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0028
SKU: hon-10066 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Gasket, Cylinder, MC16~28
€10.54
Gasket, Cylinder, MC16~28
TYGA no: 12192-KV3-680
SKU: hon-11187 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Top triple clamp set CNC silver, Honda VTR1000 SP1
€327.34
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and ignition switch/lock holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Set full race system no silencer , Honda MSX125 GROM
€201.40
Set, Pipe, Full Race System, MSX125 Grom. No silencer. This product is fully compatible with the silencers used on our slip on systems for anyone looking to upgrade to a full system.
Designed for the MSX125 to maximise power, made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0043
SKU: MSX-10141 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon generator/sprocket cover, Honda NSR250 MC18/MC21/MC28
€220.36
Generator/Front Sprocket Cover NSR250
This lightweight carbon component will make your engine look like it belongs in the GP paddock!Complete with all mounting holes to install speedometer drive and cable guide for side stand switch.
Important, this products re-uses the stock engine case guard from the plastic cover.
TYGA no: BPCC-9106
SKU: hon-10471 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSilencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Swing Arm Cover, Left, (Carbon) NSR250, MC21
€158.02
Swing Arm Cover, Left (Carbon) NSR250, MC21
This lightweight carbon cover fit over the stock swing arm on the NSR250 MC21.
They are designed to protect against scratches and gives that NSR GP250 look to your bike! Fit in minutes.