Bracket rear brake CNC black 84mm Brembo, Suzuki RGV250 VJ22
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Black, RGV250 VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1090
SKU: suz-10083 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiSet pipe full system with maggot silencer, Honda Monkey 125 2018-
€442.31
Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>
Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.
All fitting hardware included.
</br>
<strong>Instructions</strong>
<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>
</br>
<strong>Performance and Dynograph</strong>
The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.
</br>
<strong>Please also see:</strong></br>
<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>
<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>
Triple clamp set CNC black, Honda NSR250 MC21 CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21
CNC machined TYGA lower triple clamp for the MC21 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1841
SKU: hon-10556 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopSeat set street RC211V, NC35 kit
€749.18
This set of bodywork is designed to replace the NC35 stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0029 (street, carbon)
BPFS-0030 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0035
SKU: hon-10136 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopFairing set street RC211V TE3, NC35 kit
€910.45
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank. Differs in headlight fitment from BPFS-0013.
This set of bodywork requires extensive modification of the NC35 including a tank cover, a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights and all the fitting hardware. It also includes a steering stopper to limit steering movement.
Comprises the parts shown below which are also available separately:
*A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0033
SKU: hon-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopFairing set street GP2010, Honda NSR250 MC21/MC28
€510.74
This set of bodywork comprises of the parts showing in the picture which are also available separately.
This fairing has excellent aerodynamics for racing or road use.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
* A clear screen is provided unless you specify tinted in the comment box at check out.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0094Â
SKU: hon-10221 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon passenger seat cover, Honda MSX125 GROM
€185.39
Passenger Seat Cover, (Carbon), MSX125 Grom.
This is the carbon version of our MSX125 passenger seat cowling. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPFX-7128 in a variety of colour options. See website for more details.
&nbsp;
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
TYGA no: BPCX-7128
SKU: MSX-10145 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopWater Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28