Belly pan race cup style, KTM RC390 (16-)
€160.51
Belly Pan, Race, (GRP), Cup Style, KTM RC390 (16-18)
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 250 and 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
TYGA no: BPFL-7331
SKU: ktm-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopTriple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon heel guard right, ninja 400
€43.13
Replacement Right heel guard for TYGA step kits, see model below.
STAA-0026 (Kawasaki Ninja 400)
TYGA no: Carbon heel guard right, ninja 400
SKU: kaw-10110 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-Carbon tankcover rear RVF, NC35
€395.36
This carbon cover fits over the stock NC35 tank in minutes. Ideal for covering damaged tanks or for completing the ful carbon body work makeover.
TYGA no: BPCX-9201
SKU: hon-10144 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopLower cowling stock , Honda VFR750 RC30
€225.28
Lower cowling “stock “, Honda VFR750 RC30 (hon-10566)
Direct replacement for OEM Honda lower cowling and made to similar thickness as the Honda one for faithful reproduction, strength and stiffness. Can be used with TYGA Performance or factory Honda RC30 upper cowlings
Shifter Fork R., MC28
€7.67
Shifter Fork R., MC28
TYGA no: 24211-KV3-000
SKU: hon-11146 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Fuel Tank, GRP, HONDA RVF400 NC35
€1,226.36
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFG-0008
SKU: hon-11364 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Upper Cowling (Street GRP) MC21, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0006Painted
SKU: hon-11282 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, Silencers