Airbox GRP, A kit, Honda RS250 NX5
€480.84
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPFX-0008
SKU: hon-11312 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsSet exhausts side by side stainless steel, Honda NSR250 MC21
€769.95
The ultimate set for your Honda NSR250 NSR300!!
Set exhausts side by side stainless steel, Honda NSR250 MC21/MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Our TYGA Performance Honda NSR250 two stroke motorcycle expansion systems are now THE system to have gracing your NSR250. And why not? TYGA pipes for NSR 250s are available for MC21 and MC28 models and there are two styles of chamber to choose from:
Tyga Side By Side (SS) which exit conventionally on left and right
For more information on how to get the best power out of this system, combine it with other parts of our MC21 Power Up Kit (see under ‘technicical help’ on right hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)Important when ordering
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0005a
SKU: hon-10260 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC21, ShopSeal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Crankshaft bearing , Honda NSR250 MC21/MC28
€288.13
Crankshaft Bearing, Set, NSR250 MC21/28
Set of three genuine OEM KOYO main crankshaft bearings for your Honda NSR250 MC21/28 consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012set
SKU: hon-10505 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various partsCarbon set, Yamaha YZF-R125 2009 –
€495.04
Carbon Set, YZF-R125 2009-2013.
This set comprises the carbon products below for the 1996-2006 Aprilia RS125.
Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
Shroud left yellow, Honda MSX125 GROM
€32.45
Shroud left yellow, OEM Honda part
TYGA no: 83490-K26-900ZF
SKU: MSX-10324 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFork cap kit, Suzuki RGV250 Vj23
€317.71
After 20 years or so of hard use, many RGV’s damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any RGV250 VJ22 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Top Triple clamp CNC silver , Honda NSR250 MC18/MC21/MC28
€177.34
Top Triple Clamp, Race, CNC Silver, NSR250
CNC machined top triple clamp for your NSR250. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0141).
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0041Â
SKU: hon-10264 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop