Bearing, Mainshaft, Transmission Plate, NSR250 MC18, MC21, MC28
€7.73
This NSK bearing is a high quality, direct replacement for OEM bearing 91021-KV3-771.
Extensively tested and used on many TYGA engines.
TYGA no: TYPP-0007
SKU: hon-10839 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Universal parts, Various parts, Various parts, Various partsCarbon race airbox, Suzuki RGV250 VJ22
€496.10 €412.40
Carbon race airbox, Suzuki RGV250 VJ22 (suz-10098)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
jet #310 – #320 (*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: special015
SKU: suz-10098 Categories: ALL products, High performance, High performance, RGV250 VJ22, Shop, SuzukiWasher lock, many Honda
€7.39
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 90505-425-830
SKU: hon-11274 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopFiller cap and seat set, flush fitting, HRC type
€46.27
Filler Cap and Seal Set, Flush Fitting, HRC Type
TYGA version (reproduction) of HRC part number: 17521-NX4-680 and seal 17515-NX5-770. See schematic for details.
Consists of CNC machined filler cap and seal to fit TYGA Carbon tanks BPCG-002, BPCG-0003 and HRC fuel tanks such as NX4, NX5, NXA, NX7 etc.
TYGA no: TYLY-0180
SKU: hon-10961 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopNut, Flange, 8mm, MC28
€0.86
Nut, Flange, 8mm, MC28
TYGA no: 94050-08000
SKU: hon-11099 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set pipe, Full race with maggot silencer NEW, Kawasaki ZXR250 2013 –
€519.40
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Moto Maggot Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted Moto Maggot silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Moto Maggot silencer EXSL-9213
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0081
SKU: kaw-10064 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Seat set RC211V, NC35
€264.89
This is the all GRP seat cowling used in the NC35 RC211V style seat cowling kits, BPFS-0029 and BPFS-0030.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFT-9018
SKU: hon-10149 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopSeat set street RC211V, CBR250RR MC22
€520.21
his set of bodywork comprises the parts below which are also available separately.