Carbon meter cover black, MC18/NC23/NC30
€42.01
Attractive carbon cover for NC30 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits Honda models as follows: MC18 NSR250, NC23 CBR400-RR, NC30 VFR400R. (Not MC19)
TYGA no: BPCC-0006
SKU: alg-10057 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Aluminium wheel spacer kit “silver” , KTM Duke – RC125/RC200/RC390
€109.34
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TPER-0003
SKU: ktm-10074 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsTyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom
€64.46
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom. Complete with bearings.
Silencer stainless steel round 86mm (4 stroke) 38,1mm
€259.22
This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
TYGA no: exsl-0019
SKU: alg-10111 Categories: 4 stroke exhaust sets, ALL products, By model, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, Exhausts, Honda, Shop, SilencersLower Cowling (GRP), NSR250 Tyga, Race, Stock Shape, Assy.
€228.48
Stock shape, race lower cowling for the MC21 and MC28.
This part is a direct replacement for OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts filled in as well as extra clearance for the exhaust chamber where it exits on the rear right lower side. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings. MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-9001 for similar product
TYGA no: BPFL-0001
SKU: hon-10236 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopFront fork overhaul kit, Honda MSX125 GROM
€55.41
Overhaul Kit, MSX125 Grom
Description:
Special fork disassembly / assembly tools for MSX125 Grom front forks.
31mm fork clamps with hole location will hold the fork stanchions securely, during overhaul.
14mm Hex wrench ideally cut to length to fit through the hole in the fork lowers to reach the socket head cap.
TYGA no: TYTO-0010
SKU: MSX-10326 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Tools, Various parts, Various partsShroud left Blue, Honda MSX125 GROM
€32.45
Shroud, L, Blu
TYGA no: 83490-K26-900ZE
SKU: MSX-10225 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shopcarbon rear hugger wide wheel, RVF400
€308.02
Rear Hugger (Carbon), RVF400 NC35, Wide Type, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC35 RVF400 fitted with a wide 160 section tyre whre the stock model hugger BPCH-7014 is too narrow. Note this product is not suitable for bodywork which uses the stock subframe such as the BPFS-0078 and all stock shaped rear ends where the rear fender may contact with the hugger. This product is sutable for NC35s fitted with TYGA RC211V and T13 Style bodywork kits which have a high style seat cowling with no fender for the hugger to fit in. Note we make similar products:
BPCH-7004, NC30 150/18 tyre size
BPCH-7014 NC35 150/17 tyre size
TYGA no: BPCH-7024
SKU: hon-10563 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop