Set full race system under belly with long stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0107
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0109) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Triple clamp set CNC black, NC35
€673.57
riple Clamp Set, CNC Black, NC35 RVF400
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1242
SKU: hon-10157 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopTriple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit CBR250RR MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3309
SKU: hon-11260 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSet, Exhaust Chamber,Stainless Steel, Yamaha TZR250 3MA
€771.82
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXCS-0051
SKU: yam-10085 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaCarbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsCarbon under cowling, Honda MSX125 GROM
€201.39
Under Cowl, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in GRP painted to match the Honda factory paintwork.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPCL-7028
SKU: MSX-10134 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSeat cowling assy, Honda NSR250 MC28
€213.43
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9112
SKU: hon-10301 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopDry clutch rebuild kit, Honda NSR250 MC21/MC28
€435.44
For those dry clutch motors which have had some tuning work, sometimes the stock components are not up to the task and clutch slip is a potential problem. To avoid this, the Tyga dry clutch kit will prevent such an occurrence. Extensively tested on our Tyga 300cc big bore engines it has proven its worth over and over again. This kit includes all parts needed to upgrade your clutch and get the power to the ground.
Honda OEM:
4x 22201-KV3-980
1x 22202-KV3-980
6x 22321-KV3-780
5x 22401-KV3-000
1x 91302-KV3-781
TYGA no: NHPS-0003
SKU: hon-10438 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop