Carbon front fender Dax German
€230.75
Front Fender, (Carbon) German type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCF-7037
SKU: MKY-007 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopTYGA / Kitaco Power up kit maggot , Honda MSX125 GROM
€702.49 €632.24
TYGA/KITACO Power Up Kit, Maggot Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0097
SKU: MSX-10306 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopGearshift lever replacement , Honda RS250 NX5
€65.11
Replacement gear lever for your TYGA Step Kit. Complete with bearings.
TYGA no: STAL-0012
SKU: alg-10248 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopPod Filter, UP-10°, Suzuki RGV250 VJ21/VJ22
€52.66
Pod Filter, UP-10°, RGV250 VJ21/VJ22
Replacement Pod Filter.
For complete set please see TPER-0100
TYGA no: TPER-0100A
SKU: suz-10149 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsSilencer clamp single 60mm
€11.78
This single silencer clamp is specifically designed for TYGA expansion chambers for the Honda NSR150 and Aprilia RS125
Designed to securely clamp 60~61mm O.D. silencers.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0007
EXCS-0013
EXCS-0019
EXCS-0037
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0010
SKU: alg-10001 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, NSR125 JC22 1994 - 2003, NSR150SP, RS125, ShopPower pack Boyesen/airbox/Powervalve, Suzuki RGV250 / Aprilia RS250
€979.92 €892.11
Power pack Boyesen/airbox/Powervalve, Suzuki RGV250 / Aprilia RS250
The perfect set voor that extra power and better throttle response.
Part shown in the picture are all parts that come with the set.
The RS250 has an extra cover for under the tank, this will fit both RS250 types.
RGV250 – picture 1 and 2
RS250 – picture 3 and 4
Airbox:
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
Powervalves:
et ( 4 pieces), complete CNC billet aluminium, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Power reeds:
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
TYGA no: power p002
SKU: alg-10242 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Suzuki RGV250Space S/A shaft, Ninja 400
€4.60
Spacer, S/A Shaft, Ninja 400
To be used for STAA-0026 ( Step Kit Kawasaki Ninja 400)