Lower Cowling, GRP, RC36-2, RC30 Style, Street, Assy
€250.67
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFL-7049
SKU: hon-11485 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistClamp, Silencer 2T, 70mm, Offset
€13.16
Clamp, Silencer 2T, 70mm, Offset
For use with Two stroke Silencers:
EXSL-0083
EXSL-0084
TYGA no: EXCL-0041
SKU: hon-11051 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, ShopSet exhausts GP style stainless steel, Suzuki RGV 250 VJ22
€702.49
Your Suzuki RGV250 VJ22 just needs this beautiful cone welded stainless steel exhaust, everything you need performance and looks.Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.New! Tyga Performance RGV250 exhausts are now supplied with a double ‘O’ ring manifold for superior sealing. In addition, the ‘O’ rings are made from Viton which are resistant to automotive fluids and better able to withstand higher temperatures.By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value and are available in two configurations.side by side (left and right exiting) stainless steel chambers, EXCS-0009GP (conventional twin right exiting) stainless steel chambers, EXCS-0010
The graph showing the power output of an RGV250. This independent test was conducted in the UK by Triple MMM Racing and compares the TYGA Performance EXCS-0010 stainless steel GP system, to a stock Suzuki system.This product EXCS-0010 is made from stainless steel and has both chambers exiting on the right.
Parts included with this product:1 x left side chamber, GP (right exiting) stainless steel1 x right side chamber, GP(right exiting) stainless steel1 x silencer double clamp and mounting bolt, washers and nuts2 x manifolds4 x manifold ‘O’ rings2 x mounting flanges4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set<iframe width= 560 height= 315 src= https://www.youtube.com/embed/LmQAQqP9_AQ frameborder= 0 allowfullscreen></iframe>
TYGA no: EXCS-0010
SKU: suz-10024 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, RGV250 VJ22, Shop, Suzuki Tags: aprilia rs250 suzuki RGV250.circuit pipes, Cone welded racing pipesSection header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsWiseco Piston, TYGA 300cc Big Bore Kit *
€227.29
The WISECO piston kit includes Piston, Rings, Wrist Pin and Circlips (2X) Use standard NSR250 Piston Bearing, 13111-KV3-771 (not included).
The WISECO pison offers great strength with light weight thanks to it’s forged design. And has a Zylan coated skirt for low friction.
This piston is a direct replacement for the ‘stock’ piston included in the TYGA 300cc big bore kit and gives greater scope for performance modifcation.
We offer this piston in two styles. Either shortened on the front side for the standard NSR250 crankcases, or full length for use in modified cases. Please add your choice of style to the comment box during checkout.
By default we will supply the shortened pistons.
Please contact us for instructions on modifying the cases for using full length skirted pistons
TYGA no: TPER-0026
SKU: hon-10882 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon bellypan race cup style, KTM RC390 2016 –
€321.01
Belly Pan, Race, (Carbon), Cup Style, KTM RC250 and RC390 (16-19)
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clearcoat so no additional painting is necessary.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
This product can be fitted to a street bike as well as cup racing bikes.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 250 and 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
TYGA no: BPCL-7331
SKU: ktm-10130 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopSeat support GP-T, Honda VFR400/RVF400
€50.22
Seat Support, (GRP), NC30/NC35, GP-T
This product is to be used with subframe TYLY-0135 and seat cowlings BPFT-9034 and BPCT-9034.
TYGA no: BPFX-9234
SKU: hon-10587 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Handle bar tube TYGA,
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm).
Comes fitted with plastic bungs in each end.