Silencer stainless steel Motogp style (4 stroke) 50.8mm maggot , Honda CBR500
€227.37
Maggot silencer, CBR500, with 50.8 mm. inside diameter. With mounting lug suitable for CBR500R. Does not include pipe section or springs
TYGA no: EXSL-1013
SKU: hon-10344 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, SilencersCarbon ignitioncap, Aprilia RS125
€117.41
This lightweight carbon cover simply slips on over the nasty looking plastic one. It can be secured in place by silicone sealant or double sided tape
TYGA no: BPCC-7107
SKU: apr-10011 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopTorque arm link Titanium, Honda NSR250 MC21
€326.36
Torque Arm Link, MC21
The NSR250 engine is rubber mounted to the frame to reduce vibration. The torque arm link that is fitted between the swing arm pivot and the engine stops the engine from lurching backwards and forwards during acceleration, deceleration and gear changes, while still absorbing the engine vibrations.
Over time, the torque arm link bushes become worn and loose. This then allows small movements especially when power is applied. It is particularly noticeable when changing from one low gear to another and makes the gear change feel very clunky.
The initial reaction is to check the gearbox, but before going there, it is a good idea to check the torque arm and if it is worn, to replace it with this high quality titanium upgrade. The improvement can be dramatic.
Replaces the following Honda OEM part numbers:
- 50184-KV3-830
- 50186-KV3-830
- 50188-KV3-830
- 50185-KV3-830 (assy of the above 3 part numbers)
This part, which is very hard to find as a genuine product, is made of 64 titanium by T2Racing, and all parts are made of full titanium.
*One set consists of 3 parts for each part. We do not sell individual items.
*Two collars are already press-fitted into the link body.
TYGA no: TPER-5005
SKU: hon-11377 Categories: ALL products, High performance, High performance, Honda, NSR250, NSR250 MC21, Shop, Various partsFront Fender, Ebony, Ninja 250R 2008 -12
€95.79
Front Fender, Ebony, Ninja 250R 2008 -12
TYGA no: 35004-0079-H8
SKU: kaw-10213 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon frame covers (pair), Honda CBR1000 2008-’15
€495.59 €305.74
Frame Cover, Pair, (Carbon) 2008-15 CBR1000RR
These lightweight carbon covers fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident. It has a layer of carbon/Kevlar inside for abrasion resistance.
TYGA no: BPCC-7001
SKU: hon-10527 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopRacing stepkit silver/BLUE adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027BLUE
SKU: msx-10420 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopVHM Cyl. Headset Honda CR500 ’89-’01
€608.95 €565.68
VHM Cyl. Headset Honda CR500 ’89-’01 (alg-10214) AA33121
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (51.00cc)Optional inserts:– blindThis VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33121Â Â Â Â Â Â Â Â
SKU: alg-10214 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsCarbon belly Pan Race/street , WSS300 TYGA version, KTM RC390
€466.05
Carbon belly Pan Race/street , WSS300 TYGA version, KTM RC390
This carbon belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.
All fitting hardware included
See table below for compatibility between belly pans and exhaust systems.
Note, we also offer this product in GRP unpainted and in GRP Painted White see the following products for details:
BPFL-7431
BPFL-7431White
Please do note the product photos are showing the unpainted version
TYGA no: BPCL-7431
SKU: ktm-10152 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 390