Set, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Lock washer crankshaft RGV250/RS250
€5.75
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Carbon sprocket cover, Aprilia RS250
€115.38
Sprocket Cover (Carbon), Aprilia RS-250
Attractive alternative to the stock sprocket cover and uses original mounting bolts.
TYGA no: BPCC-7217
SKU: apr-10075 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSeat Cowling, Undertray, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
€180.64
Seat Cowling, Undertray, Street, (Carbon), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0142. Please note that the following parts are required to complete the set:
BPCT-7331A Seat Cowling, Top
BPCT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPCT-7331B
SKU: ktm-10115 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Clutch Lever TYGA CNC flip up ,Honda MSX125 GROM
€54.27
CNC machined from solid billet, these flip up type levers are made to a very high standard and are adjustable for reach and length.
TYGA no: LEVC-7001
SKU: MSX-10299 Categories: ALL products, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Various parts, Various partsFairing set street T10, NC35 kit
€746.54
Fairing set street T10, NC35 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
This kit is supplied with all additional fasteners required to mount it to a stock NC35. It uses the original stock Honda mirrors but requires the special meter and mirror stays supplie
TYGA no: BPFS-0090
SKU: hon-10131 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon front fender, Honda VTR1000 Sp1/Sp2
€220.62
High quality carbon fibre gloss finish replacement part that weighs a fraction of the original heavy plastic one. Saves on unsprung weight and enhances your bike’s appearance at the same time.
Beautiful, perfect fitment and give your bike that HRC look.
Decal set, type 4 Blue Metallic scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 4, 2014 Blue Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026U
SKU: MSX-10230 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop