VHM piston (flat top) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521750 + size
SKU: alg-10399 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsNumber board miniRacerXtreme, Honda MSX125 GROM
€32.64
Number Board, (GRP) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to transform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed
Set full race system no silencer , Honda MSX125 GROM
€201.40
Set, Pipe, Full Race System, MSX125 Grom. No silencer. This product is fully compatible with the silencers used on our slip on systems for anyone looking to upgrade to a full system.
Designed for the MSX125 to maximise power, made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0043
SKU: MSX-10141 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon shroud (pair), Honda MSX125 2021-
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7248
SKU: msx-10501 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopClutch lever titanium, NC29 NC30 NC35
€29.95
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
TYGA no: LEVC-9042Â
SKU: alg-10056 Categories: ALL products, CBR400RR NC23, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Stay, reg/rec race, Kawasaki Ninja 400 2018-
€19.98
Stay, Reg/Rec, Race, Ninja 400
TYGA no: BPSY-0230
SKU: kaw-10150 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Upper cowling street RVF, NC35
€284.65
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings. Race version (BPFU-0009) also available.
Suitable with BPFL-0003 stock shaped lowers.
See also kits BPFS-0069 and BPFS-0070.
TYGA no: BPFU-0029
SKU: hon-10147 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopSide cover left white, Honda MSX125 GROM
€39.31
Side cover left white, Honda MSX125 GROM (msx-10019)
OEM Honda part
TYGA no: 83540-K26-900ZC
SKU: MSX-10022 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop