Lower cowling GP-T, Honda NSR250 MC21/MC28
€183.50
Lower Cowling (GRP), MC21, MC28, GP-T, Assy.
This product is designed to be used with BPFU-9033 as part of the Bodywork set BPFS-0137
.
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9033.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9033
SKU: hon-10532 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopSeat set style RVF, NC30
€240.81
RVF shape Street Seat Cowling with taillight holes. Single seat, direct replacement for use on the Honda NC30, styled the same as the RVF400 seat cowling but single seat like the RC45.
Seat cowling support is included in kit. This seat cowling uses OEM seat pad and taillight not included
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad. However, modification of stock NC30 taillight is needed because of width of RVF seat cowling is less than NC30
TYGA no: BPFT-9013
SKU: hon-10077 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon air duct NX6 NSR500V
€139.58
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Set pipe full system with maggot silencer, Honda Monkey 125 2018-
€442.31
Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>
Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.
All fitting hardware included.
</br>
<strong>Instructions</strong>
<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>
</br>
<strong>Performance and Dynograph</strong>
The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.
</br>
<strong>Please also see:</strong></br>
<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>
<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>
Front fender (GRP) primer, Honda Grom 1st + 2nd gen.
€96.78
Front Fender, (GRP), Monster Style, MSX125, Unpainted. This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
Please also see our carbon versions BPCF-7128g and BPCF-7128f
TYGA no: BPFF-9128
SKU: MSX-10356 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopHandlebar Clamp, Right, Black, 50 mm.
€98.58
Handlebar Clamp, Right, Black, 50 mm.
Replacement handlebar clamp for handle bar set TYLY-1078
RC Valve Flap R., NSR150SP
€40.35
RC Valve Flap R., NSR150SP
TYGA no: 14201-KW6-840
SKU: hon-11190 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPFront fender GP, NSR250 MC18/21/28
€66.24
Back by popular demand! Attaches to the original NSR250 mounting points and can be used with all Tyga and Honda bodywork
TYGA no: BPFF-0001
SKU: hon-10376 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop