Rubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsTriple clamp set CNC black, Honda VFR400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1944
SKU: hon-10618 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Lower triple clamp CNC black, Honda NSR250 MC18/MC21/MC28
€364.10
Lower Triple Clamp, CNC Black, NSR250
CNC machined TYGA lower triple clamp for your NSR250.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
This product is also sold as part of a set TYLY-1241, Triple Clamp Set, CNC Black, NSR250.
TYGA no: TYLY-1341Â
SKU: hon-10261 Categories: ALL products, By model, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSilencer stainless moto maggot 2" VFR750F gen 4, 94-97
€216.82
Silencer, Stainless Moto Maggot, 50.8 mm, VFR750F Gen 4, ’94-’97, Assy
Maggot silencer with 50.8 mm. inside diameter, Assy (with springs)
Please note this is a replacement for the EXPS-0119 VFR750F Gen.4 full system.
Please also note that decibel killer model EXDK-0007 is compatible but not included with this exhaust system. Please add EXDK-0007 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0082
SKU: hon-11013 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon Kit, Fairing Set, Honda NX5 RS250R (ram air)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (Ram Air)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat cowling uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support, Carbon, NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (Late Model Style) (SCRE-0168)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0177
SKU: hon-10948 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopKit complete body kit “street” with front fender GRP RC30 style, Honda VFR400 NC30
€1,073.55
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0228
SKU: hon-11429 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30