Set pipe full race system WSS300 (no silencer), KTM Duke 390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM 390 Duke
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete system with silencer please see EXPS-0142
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Seal, Waterpump, MC21/28
€4.05
Seal, Waterpump, MC21/28
TYGA no: 10x20x5
SKU: hon-11082 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Carbon chain guard, Kawasaki ZX10R 2011-13
€123.76
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Upper cowling street RC211V style, Honda CBR250 MC22
€217.38
This product is part of set BPFX-9225, (the other part being BPFX-9225F). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
€139.72
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
LiteTek Silicone Hose Kit, 6 pieces, to suit Honda CBR250RR MC22
3 ply polyester reinforced
Consist of the following hoses:
1x Hose A, Water Pump Inlet (OE part nr: 19501-KAZ-000)
1x Hose B Water Pump Outlet (OE part nr: 19061-KY1-000)
1x Hose C Radiator Inlet (OE part nr: 19502-KAZ-000)
1x Hose D Engine Outlet Left (OE part nr: 19066-KAZ-000)
1x Hose E Engine Outlet Right (OE part nr: 19068-KAZ-000)
1x Hose F Hose (OE part nr: 19521-KAZ-000)
TYGA no: SHK-001-Honda-MC22
SKU: alg-10358 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, HondaCarbon chain guard, Yamaha R1 2004-8
€137.88
Same shape as stock. To be used with our R1 carbon hugger BPCH-7002.
TYGA no: BPCX-7002
SKU: yam-10006 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2007- 8Brake lever silver, NC30 NC35
€39.67
CNC machined from solid billet, this lever replaces the main section of the lever assembly and attaches to to the stock Honda adjuster and plunger to maintain that OEM feel. Easy to install.
These levers are designed to fit most of the Honda sports bikes of the 1990s:
MC19, MC22, MC18, MC21, MC28, NC23, NC29, NC30, NC35, RC30, RC40, RC45 etc.
TYGA no: LEVB-0031
SKU: alg-10052 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30