Exhaustset race Stainless steel Silencer aluminium round , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round aluminium silencer EXSL-0047 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0053
SKU: hon-10358 Categories: 4 stroke exhaust sets, ALL products, By model, By product, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Bikini fairing (GRP) red Honda MSX125 GROM
€114.68
Bikini Fairing (GRP), MSX125 Grom
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in GRP shown here and also in carbon (see BPCU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
Available in OE Honda colours to match your bike.
TYGA no: BPFU-7128 R
SKU: MSX-10210 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCollar manifold, Aprilia RS125
€27.03
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA system:
EXCS-0019
TYGA no: EXMN-0004Â
SKU: apr-10003 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopVHM Cyl. Headset Kawasaki KX125 ’03 –
€281.95 €256.04
VHM Cyl. Headset Kawasaki KX125 ’03 -> (alg-10218) AA33043VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33043
SKU: alg-10218 Categories: ALL products, Kawasaki, Kawasaki MX, Motocross, Shop, VHM productsSeat cowling, Suzuki RGV 250 assy
€268.91
This seat cowling is to be used in our VJ22 kits, BPFS-0037and BPFS-0038.
This product is compatible with Sub frame TYLY-0028. Will not fit stock Suzuki subframe
TYGA no: BPFT-9026
SKU: suz-10063 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTriple Clamp Set, CNC Black, NSR250, MC28
€619.36
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform! They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation.
The top clamp has the ‘bolt-on’ ignition switch holder fitted, which can be removed for racing. The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1641
SKU: hon-10872 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28Decibel killer silencer stainless, moto maggot
€29.15
Spacer side stand, VFR750F gen 4, 94-97
Spacer, Side Stand, VFR750F Gen 4, ’94-’97
For use with:
EXPS-0119 Set, Pipe, Full Race System, VFR70R Gen.4, ’94-’97, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXDK-0007
SKU: hon-11035 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97