VHM piston (15mm piston pin) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521708 + size
SKU: alg-10400 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsSide hanger left TYGA, Honda RS250 NF5
€47.25
Tyga Step Kit Replacement Left Side Hanger, NF5 RS250R
Exact replica of the HRC part 50640-NF5-000, Holder, L. Step.
TYGA no: STAH-0051
SKU: hon-10547 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopKevlar ECU cover, Honda NX5
€126.42
Cover, Kevlar, ECU, NX5 RS250R
Kevlar replacement part for Honda/HRC part number: 20260-NX5-000
TYGA no: BPCC-0129
SKU: hon-10698 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsKit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0189
SKU: hon-10977 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon chain guard stock , Honda NSR250 MC21
€75.27
Chain Guard (Carbon), NSR250 MC21
This carbon chain guard replaces the stock plastic part which after 25 years is starting to look a bit faded and battered on most MC21s. By replacing it with the TYGA part, your swing arm will look fresh and tidy!
Note, this product cannot be used with hugger BPCH-0002 without first modifying it because it uses the same mounting hole as the hugger uses.
TYGA no: BPCX-0002
SKU: hon-10570 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopSilencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
€216.73
Silencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
The Dimensions of this silencer are as follows:
I.D. 44.5mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –
€216.12
Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0033
SKU: kaw-10021 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersGenuine HRC brake reservoir cover
€53.00
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: 82077-N99_000
SKU: hon-11307 Categories: ALL products, Bike covers, By model, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, Merchandise, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2